Home > Upgrades > Powder Monitor SPM-2

SPM-2 powder monitor

The powder monitor checks for faults in the coating of the can bodies. The optical sensor scans the seam coating (reflection principle).

A light curtain is radiated onto the seam coating, and the reflected light is measured.
The coating material is the reference. As soon as the coating is translucent, the increase in the amount of reflected light is measured and this increase is detected.

Advantages

  • Monitors the total length
  • Checks every can body
  • Detects powder holes up to 0.8 mm
  • Detects twin cans
  • Detects can jams
  • Cost saving due to optimized powder coating
  • Easy operation thanks to integrated system
  • Rapid change-over with automatic set-up
  • Easy maintenance: Operation equal to weld monitor
  • Programmable and reproducible standard settings of all powder monitor parameters
Unicontrol with SPM-2 powder monitor channel

Powder monitor SPM-2

TypeSPM-2
Welding speed max.140 m/min
Measuring range6 – 16 mm
Ambient temperature max.50° C